If your Weber Smoque shows an error code, don’t worry. These codes help you identify and fix issues quickly. Use this guide to understand what each code means and how to resolve it.
Quick Reference Table
| Code | What It Means | Action |
|---|---|---|
| E1 | Auger Jam | Clear jam and restart |
| E2 | Fan Motor Failure | Check wiring and fan |
| E3 | Flame Out | Clean burn pot and restart |
| E4 | Communication Error | Reset or contact Weber |
| E5 | Grill Too Hot | Cool down and clean |
| E6 | Failed Ignition | Check igniter and pellets |
| E7 | Auger Motor Failure | Check wiring or replace motor |
| E8 | Temp Sensor Error | Check probe connection |
| E10 | Improper Shutdown | Clean and restart |
| E11 | Glow Plug Failure | Inspect or replace igniter |
| E16 | Barbecue ID Error | Contact Weber |
| E17 | Probe Not Detected | Reconnect or replace probe |
| E18 | Temperature Drop | Check pellets and lid |
| E19 | Flame Out Notification | Monitor and restart if needed |
Tip: Press the dial to clear notifications (E17–E19). For faults (E1–E16), fix the cause before restarting.