After completing a leak check (refer to owner’s manual) continue to follow the below instructions for igniting your grill:

 

1. Open the hard cover.
2. Check that all burner control knobs are in the off position.
3. Turn the LP tank on by slowly turning the tank valve counterclockwise; wait 60 seconds.
4. To ignite, start with the burner furthest to the left. Push the burner knob in and turn it counterclockwise to the start/high position, until you hear it "snap” and hold for two seconds.
5. Repeat for the remaining burners. If the burners do not ignite, refer to troubleshooting for manually lighting the grill or gas flow in your owner's guide.